Skip to main content

rexotech.io

Get a quote
  1. Home
  2. Care Care

Aftercare & application

Car care Keep the shine for years

Simple steps to apply our coatings at home, and the routine that keeps your film and paint looking new.

Get A Service

02 / Care guide

A simple routinethat keeps it new

Film and coating do the hard work. A few minutes of the right care keeps the gloss, the water beading and the protection going for years.

  1. First 7 days

    Let it settle

    • Keep the car dry for the first 24 to 48 hours
    • No washing for 7 days
    • A little haze or tiny bubbles under film usually clear on their own
    • Park in the shade when you can
    First wash from Add reminder
  2. Every week

    Gentle wash

    • Hand wash with a pH-neutral shampoo
    • Use a soft microfibre mitt, top to bottom
    • Dry with a clean, plush towel
    • Remove bird droppings and tree sap the same day
    Weekly from Add reminder
  3. Every month

    Inspect & refresh

    • Look along film edges for any lifting or dirt lines
    • Top up with a ceramic spray for extra slickness
    • Wipe and dress plastic trim
    • Clean glass inside and out
    First check Add reminder
  4. Every 6 months

    Deep care

    • Decontaminate with a gentle iron remover
    • Apply a fresh layer of ceramic coating spray
    • Visit us for a quick edge and surface check
    • Restore any faded trim
    Due on Add reminder
Do
  • Use a pH-neutral shampooStrong soaps strip the top coat and dull the shine.
  • Wash by hand with microfibreSoft mitts and towels keep the surface scratch-free.
  • Clean droppings and sap quicklyThey are acidic and can stain if left in the sun.
  • Top up with ceramic sprayA light coat every month keeps water beading strong.
  • Park in the shade when possibleLess heat and UV means a longer life for film and coating.
Don't
  • Blast the edges with a pressure washerKeep the nozzle at least 30 cm away from film edges.
  • Use automatic brush car washesHard brushes can scratch the surface and catch edges.
  • Use harsh chemicals or polish on filmSolvents and cutting compounds can damage the top coat.
  • Pick at or lift a film edgeIf an edge lifts, contact us so we can fix it properly.
  • Wash in direct hot sunWater and soap dry too fast and leave spots.